EVAPORUST - TURAS Land Rover Build
As part of the Land Rover build project,the objective was always to try and salvage what we could and reuse parts and items within reason. By doing this, we could save a few bob and also have more control in managing the project. On assessing the Land Rover we knew that we had some surface rust on parts and we believed we could bring them back to life by treating them with certain solutions, of course there were other parts that were too far gone and could not be saved. One of the products that we had not used in the past but had seen some very positive reviews about was Evapo-Rust. We got on to Colin from Big Branding in the UK and explained what the plan was with the build and he was immediately on board. It was agreed that we would use Evapo-Rust to tackle the rust issue and then apply DINITROL cavity and underbody wax. First up was to remove the parts that we wanted to reclaim and treat with the Evapo-Rust. One of the main attractions to using the Evapo-Rust was the fact that it was a safe and non toxic rust remover that pretty much could bring parts back to life. Also there is no mixing required, it’s simple to use and does the job in a relatively short period of time. It’s also interesting to note that you can keep using the solution for other rusty items that you have knocking around your she,over and over until the solution turns black. It is estimated that one gallon will remove 1/2 lb of dry rust, now that’s impressive. Learn more in TURAS Camping and 4WD Magazine https://www.turas.tv/2021/05/evaporust-rust-remover-turas-land-rover-build/ Product Link: http://evaporusteurope.com/
As part of the Land Rover build project,the objective was always to try and salvage what we could and reuse parts and items within reason. By doing this, we could save a few bob and also have more control in managing the project. On assessing the Land Rover we knew that we had some surface rust on parts and we believed we could bring them back to life by treating them with certain solutions, of course there were other parts that were too far gone and could not be saved. One of the products that we had not used in the past but had seen some very positive reviews about was Evapo-Rust. We got on to Colin from Big Branding in the UK and explained what the plan was with the build and he was immediately on board. It was agreed that we would use Evapo-Rust to tackle the rust issue and then apply DINITROL cavity and underbody wax. First up was to remove the parts that we wanted to reclaim and treat with the Evapo-Rust. One of the main attractions to using the Evapo-Rust was the fact that it was a safe and non toxic rust remover that pretty much could bring parts back to life. Also there is no mixing required, it’s simple to use and does the job in a relatively short period of time. It’s also interesting to note that you can keep using the solution for other rusty items that you have knocking around your she,over and over until the solution turns black. It is estimated that one gallon will remove 1/2 lb of dry rust, now that’s impressive. Learn more in TURAS Camping and 4WD Magazine https://www.turas.tv/2021/05/evaporust-rust-remover-turas-land-rover-build/ Product Link: http://evaporusteurope.com/