TIna 2 Printer still not working. (boring video).
PLEASE READ ME! :) First of all, a big thank you to everyone that has tried to help me to get it working again! Second im going to try a new game, and probably upload to my gaming channel so please don't be upset if im not answering your comments right away. :) Third, i do appreciate all the help and support but for now im going to take a pause trying to fix the 3d-printer and just focus on painting and other stuff, sorry if you started following me just for the 3d printing. Forth, tomorrows video will be another dusting of the vault video (probably) just because as i said i might get stuck playing the game for my other channel. :) Fifth, below i added some time-codes if your curious about the problems with the printer, as i said this is a really boring video, that is uncut, so its mostly for the people that really like problem solving and or are tech freaks i guess. And partly for myself i guess just so future me knows i tried haha :D Time Codes: 22:28 to 12:43, trying to print my Dice GCODE Link here: https://youtu.be/yNZb5j22Tz0 12:44 to 31:55 trying to print my FattyCat GCODE Link here: https://youtu.be/Bni3RQe6Xio 31:55 to 43:55 trying to print articulated slug (Not my design, found it on Thingiverse), link here: https://www.thingiverse.com/thing:2818955 43:57 to 46:15 trying to print Flexi horse (Not my design, found it on thingiverse), link here: http://www.thingiverse.com/thing:2835053 46:16 to 49:30 testing to use magnetic sheet i bought at a hobby shop as a Printbed 49:32 to 49:58 Showing the Z adjust setting, i did NOT change this between prints, it was set to that from the first print in this video. 49:59 to 53:09 Showing some settings, printer versions, pointing to the SD= i tried wiping the SD (or micro sd card) and putting fresh Gcodes from my PC, just in case it was that issue, (if the code somehow got messed up). Also pointed to "restore default" i tried that a couple of times so that doesn't seem to help". Also pointed to "level bed" tried that a lot, doesn't seem to fix the issue. 53:08 to 53:33 (END) Showing how much my printbed lost its magnetic "power" by comparing it to the magnetic sheet i bought at a hobby shop, + thanks for watching. :) / I will still try to find a new printbed but i live in Sweden and im not used to ordering from Amazon, im more of the old school walk into the store and buy it IRL kind of guy. But so you know im planning to buy a new printbed, just haven't found where to buy one yet. Thanks for watching, reading and trying to help me. :) For now as i said, im going to focus on other stuff instead. :) I have so much fun stuff i want to try and so little time. :) Please find a way to clone me. ;)
PLEASE READ ME! :) First of all, a big thank you to everyone that has tried to help me to get it working again! Second im going to try a new game, and probably upload to my gaming channel so please don't be upset if im not answering your comments right away. :) Third, i do appreciate all the help and support but for now im going to take a pause trying to fix the 3d-printer and just focus on painting and other stuff, sorry if you started following me just for the 3d printing. Forth, tomorrows video will be another dusting of the vault video (probably) just because as i said i might get stuck playing the game for my other channel. :) Fifth, below i added some time-codes if your curious about the problems with the printer, as i said this is a really boring video, that is uncut, so its mostly for the people that really like problem solving and or are tech freaks i guess. And partly for myself i guess just so future me knows i tried haha :D Time Codes: 22:28 to 12:43, trying to print my Dice GCODE Link here: https://youtu.be/yNZb5j22Tz0 12:44 to 31:55 trying to print my FattyCat GCODE Link here: https://youtu.be/Bni3RQe6Xio 31:55 to 43:55 trying to print articulated slug (Not my design, found it on Thingiverse), link here: https://www.thingiverse.com/thing:2818955 43:57 to 46:15 trying to print Flexi horse (Not my design, found it on thingiverse), link here: http://www.thingiverse.com/thing:2835053 46:16 to 49:30 testing to use magnetic sheet i bought at a hobby shop as a Printbed 49:32 to 49:58 Showing the Z adjust setting, i did NOT change this between prints, it was set to that from the first print in this video. 49:59 to 53:09 Showing some settings, printer versions, pointing to the SD= i tried wiping the SD (or micro sd card) and putting fresh Gcodes from my PC, just in case it was that issue, (if the code somehow got messed up). Also pointed to "restore default" i tried that a couple of times so that doesn't seem to help". Also pointed to "level bed" tried that a lot, doesn't seem to fix the issue. 53:08 to 53:33 (END) Showing how much my printbed lost its magnetic "power" by comparing it to the magnetic sheet i bought at a hobby shop, + thanks for watching. :) / I will still try to find a new printbed but i live in Sweden and im not used to ordering from Amazon, im more of the old school walk into the store and buy it IRL kind of guy. But so you know im planning to buy a new printbed, just haven't found where to buy one yet. Thanks for watching, reading and trying to help me. :) For now as i said, im going to focus on other stuff instead. :) I have so much fun stuff i want to try and so little time. :) Please find a way to clone me. ;)